• 30000

    Exhibition Area(sq.m)天天乐棋牌

    Exhibition Area(sq.m)
  • 1500

    Booths

    Booths
  • 500

    Global Exhibitors

    Global Exhibitors
  • 25000

    Global Visitors

    Global Visitors
Products / Products show
About PM CHINA  Let you know our exhibition information
News / News
Industry News | 3D Printing and the Solar Power Industry: How Technology is Transforming the Sector
3D printing or “additive manufacturing” is the process of joining materials to make objects from three-dimensional model data, usually layer upon layer.Additive manufacturing (AM) has found its application in different sectors of the power industry, both in building prototypes and in mainstream production leading to process simplification and operational efficiency.AM can produce components with complex geometries, consume fewer raw-materials, produce less waste, have reduced energy consumption and decreased time-to-market.With the power industry under pressure, manufacturers are turning towards AM for solutions with reduced costs and shorter timeframes.During the initial phase of making inroads in the power industry, 3D printing has achieved a fair level of success with the power industry and technological firms creating an ally for the benefit of each other.3D printing in the solar power industryThough technical feasibility of solar cells has been proved long back, the capacity facto...
2019 - 03 - 14
Successful Conclusion of PM CHINA 2019
The 12th Shanghai International Exhibition for Advanced Ceramics, Powder Metallurgy and Cemented Carbides was successfully held at Shanghai World Expo & Convention Center from March 25th to 27th! In the three days exhibition, buyers from all over the world came back with fruitful results, while exhibitors met with valued business parner.For international exhibitors, participating in the exhibition for powder metallurgy, cemented carbide and advanced ceramics is not a temporary decision, but a wise move to reach Chinese consumers. For Chinese companies, relying on the exhibition platform to display corporate image and seek new trading partners and business opportunities is not an expedient measure, but a long-term consideration enter the world.Daily professional visitor admission data for this exhibition:First day: 10,386 Second day:  9,290 Last day:  2,961The total exhibition area is 25,000 sqm,a rise of 12% over the previ...
2019 - 03 - 28
The Heat on the Second Day of PM CHINA 2019 Was Still Growing
On the first day of The 12th Shanghai International Exhibition for Advanced Ceramics, Powder Metallurgy and Cemented Carbides, a total of 10,386 professional buyers at home and abroad were received.On March 26, the second day of the exhibition, the number of visitors reached 9,290. Visitors maintained high enthusiasm, while the scene remained an orderly manner.On site the exhibition, the latest products and technologies were showcasing. There are high-tech intelligent mechanical equipment, new type of materials and high-proformance products, etc.The three days event is full of expectations from visitors and exhibitors.Korea Advanced Ceramic Industry Delegation organized more than 30 delegates to come visit, which become a highlight of today's show. The China-Korea Advanced Ceramic Industry Exchange Meeting was held in the afternoon, the two sides had meaningful and thoughtful exchanges o...
2019 - 03 - 27
The Grand Opening of PM China 2019
On March 25, 2019, the 12th Shanghai International Exhibition for Advanced Ceramics, Powder Metallurgy and Cemented Carbides, hosted by Uniris Exhibition Shanghai Co., Ltd., was grandly opened at the Shanghai World Expo Exhibition & Convention Center.The scale of the exhibition reached 25,000 square meters, with 464 outstanding exhibitors from 19 countries and regions, showcasing more than 780 brands of leading technology equipment, quality products and solutions. On the first day of the exhibition, 10,386 professional buyers from home and abroad were participated.The companies participating in this exhibition are from China, USA, Germany, UK, Italy, France, the Netherlands, Sweden, Switzerland, Austria, Russia, Canada, Japan, South Korea, Poland, Singapore, India, Hong Kong and Taiwan covering various fields such as powder raw materials, products, mechanical equipment, 3D printing, testing instruments, gas and process solutions. Among them, there are about 210 equipment companies,...
2019 - 03 - 26
Industry News | 3D Printing and the Wind Power Industry: How Technology is Transforming the Sector
Development and innovation through materials and manufacturing technologies are essential for the wind industry to prosper and to continue increasing its annual energy production.AM could in the future enable in-site manufacture of turbine components that are designed for the unique needs of the resources of a particular location. Also, AM provides a tool to make up for the demand and supply for wind turbine spare parts of the discontinued models, for which the manufacturer will have limited quantity to meet the repairs.The US Department of Energy’s (DOE) Wind Program and Advanced Manufacturing Office has partnered with public and private organisations to apply AM in the production of wind turbine blade moulds. Traditionally, blade design requires the creation of a plug, or a full-size representation of the final blade, which is then used to make the mould. This is one of the most time-consuming and labour-intensive processes in wind blade construction where 3D printing can save these ...
2019 - 03 - 15
Industry News | China Will Become Major Player in 3D Printing, Analyst Says
Visitors stand behind a 3D-printed model created for medical purpose China is quickly closing the gap on the adoption of 3D printing, a sector on the cusp of transforming from prototyping and design to real-life manufacturing and end-user engagement, according to an industry executive.Some of the most advanced 3D printing applications will be driven by Chinese companies, in light of the level of government incentives to promote the industry, said Michael Agam, president of South Asia at Stratasys, a 3D printing and additive manufacturing solutions company based in the United States.'Customers and end-users are expecting new things in a much faster pace than before, prompting companies to come up with new products in a pace that…could never be done by traditional manufacturing,' Agam said in an interview in Shanghai.Speeding up production and shortening supply chain are not the only game changer. The need to come up with tailor-made designs that are flexible to end-user needs lie a...
2019 - 03 - 07
Industry News |3D Printed Self-Healing Material Can Fix Sole of Shoe In Two Hours
The potential uses for unique self-healing materials are numerous, varying from fixing cell phone screens and other electronics to repairing cartilage and other biomedical applications. Now, a team of student and faculty researchers from the University of Southern California (USC) Viterbi School of Engineering have created 3D printable, self-healing rubber materials that could be used to fix cracked toys, electronics, soft robotics, tires, and even the sole of your shoe.To make this material, the researchers use a 3D printing method that employs photopolymerization, which solidifies a liquid resin into a desired geometry or shape using light. “Nature excels in both self-healing and 3D shaping; for example, self-healable human organs feature functional geometries and microstructures. However, tailoring man-made self-healing materials into complex structures faces substantial challenges. Here, we report a paradigm of photopolyme...
2019 - 02 - 28
Concurrent Activity | 2019 Shanghai International Powder Metallurgy Forum
Academic Annual Meeting of China Powder Metallurgy Alliance & 2019 Shanghai International Powder Metallurgy ForumThe application fields of powder metallurgy technology are expanding day by day. In order to further promote the technological innovation of new materials, new technologies and new process in powder metallurgy industry, to continuously learn from and understand the most cutting-edge scientific and technological achievements and development at home and abroad, to improve China’s scientific progress and technological upgrading in the field of new materials, and to enhance communication and cooperation among PM manufacturers, equipment manufacturers, institutions of higher learning, research institutes and end-user groups, China Powder Metallurgy Alliance, in conjunction with Uniris Exhibition Shanghai Co., Ltd. (Organizer of PM CHINA), will hold the Academic Annual Meeting of China Powder Metallurgy Alliance ...
2019 - 02 - 27
Industry News | 3D Printing and the Solar Power Industry: How Technology is Transforming the Sector
3D printing or “additive manufacturing” is the process of joining materials to make objects from three-dimensional model data, usually layer upon layer.Additive manufacturing (AM) has found its application in different sectors of the power industry, both in building prototypes and in mainstream production leading to process simplification and operational efficiency.AM can produce components with complex geometries, consume fewer raw-materials, produce less waste, have reduced energy consumption and decreased time-to-market.With the power industry under pressure, manufacturers are turning towards AM for solutions with reduced costs and shorter timeframes.During the initial phase of making inroads in the power industry, 3D printing has achieved a fair level of success with the power industry and technological firms creating an ally for the benefit of each other.3D printing in the solar power industryThough technical feasibility of solar cells has been proved long back, the capacity facto...
2019 - 03 - 14
Successful Conclusion of PM CHINA 2019
The 12th Shanghai International Exhibition for Advanced Ceramics, Powder Metallurgy and Cemented Carbides was successfully held at Shanghai World Expo & Convention Center from March 25th to 27th! In the three days exhibition, buyers from all over the world came back with fruitful results, while exhibitors met with valued business parner.For international exhibitors, participating in the exhibition for powder metallurgy, cemented carbide and advanced ceramics is not a temporary decision, but a wise move to reach Chinese consumers. For Chinese companies, relying on the exhibition platform to display corporate image and seek new trading partners and business opportunities is not an expedient measure, but a long-term consideration enter the world.Daily professional visitor admission data for this exhibition:First day: 10,386 Second day:  9,290 Last day:  2,961The total exhibition area is 25,000 sqm,a rise of 12% over the previ...
2019 - 03 - 28
The Heat on the Second Day of PM CHINA 2019 Was Still Growing
On the first day of The 12th Shanghai International Exhibition for Advanced Ceramics, Powder Metallurgy and Cemented Carbides, a total of 10,386 professional buyers at home and abroad were received.On March 26, the second day of the exhibition, the number of visitors reached 9,290. Visitors maintained high enthusiasm, while the scene remained an orderly manner.On site the exhibition, the latest products and technologies were showcasing. There are high-tech intelligent mechanical equipment, new type of materials and high-proformance products, etc.The three days event is full of expectations from visitors and exhibitors.Korea Advanced Ceramic Industry Delegation organized more than 30 delegates to come visit, which become a highlight of today's show. The China-Korea Advanced Ceramic Industry Exchange Meeting was held in the afternoon, the two sides had meaningful and thoughtful exchanges o...
2019 - 03 - 27
The Grand Opening of PM China 2019
On March 25, 2019, the 12th Shanghai International Exhibition for Advanced Ceramics, Powder Metallurgy and Cemented Carbides, hosted by Uniris Exhibition Shanghai Co., Ltd., was grandly opened at the Shanghai World Expo Exhibition & Convention Center.The scale of the exhibition reached 25,000 square meters, with 464 outstanding exhibitors from 19 countries and regions, showcasing more than 780 brands of leading technology equipment, quality products and solutions. On the first day of the exhibition, 10,386 professional buyers from home and abroad were participated.The companies participating in this exhibition are from China, USA, Germany, UK, Italy, France, the Netherlands, Sweden, Switzerland, Austria, Russia, Canada, Japan, South Korea, Poland, Singapore, India, Hong Kong and Taiwan covering various fields such as powder raw materials, products, mechanical equipment, 3D printing, testing instruments, gas and process solutions. Among them, there are about 210 equipment companies,...
2019 - 03 - 26
Industry News | 3D Printing and the Wind Power Industry: How Technology is Transforming the Sector
Development and innovation through materials and manufacturing technologies are essential for the wind industry to prosper and to continue increasing its annual energy production.AM could in the future enable in-site manufacture of turbine components that are designed for the unique needs of the resources of a particular location. Also, AM provides a tool to make up for the demand and supply for wind turbine spare parts of the discontinued models, for which the manufacturer will have limited quantity to meet the repairs.The US Department of Energy’s (DOE) Wind Program and Advanced Manufacturing Office has partnered with public and private organisations to apply AM in the production of wind turbine blade moulds. Traditionally, blade design requires the creation of a plug, or a full-size representation of the final blade, which is then used to make the mould. This is one of the most time-consuming and labour-intensive processes in wind blade construction where 3D printing can save these ...
2019 - 03 - 15
Industry News | China Will Become Major Player in 3D Printing, Analyst Says
Visitors stand behind a 3D-printed model created for medical purpose China is quickly closing the gap on the adoption of 3D printing, a sector on the cusp of transforming from prototyping and design to real-life manufacturing and end-user engagement, according to an industry executive.Some of the most advanced 3D printing applications will be driven by Chinese companies, in light of the level of government incentives to promote the industry, said Michael Agam, president of South Asia at Stratasys, a 3D printing and additive manufacturing solutions company based in the United States.'Customers and end-users are expecting new things in a much faster pace than before, prompting companies to come up with new products in a pace that…could never be done by traditional manufacturing,' Agam said in an interview in Shanghai.Speeding up production and shortening supply chain are not the only game changer. The need to come up with tailor-made designs that are flexible to end-user needs lie a...
2019 - 03 - 07
Industry News |3D Printed Self-Healing Material Can Fix Sole of Shoe In Two Hours
The potential uses for unique self-healing materials are numerous, varying from fixing cell phone screens and other electronics to repairing cartilage and other biomedical applications. Now, a team of student and faculty researchers from the University of Southern California (USC) Viterbi School of Engineering have created 3D printable, self-healing rubber materials that could be used to fix cracked toys, electronics, soft robotics, tires, and even the sole of your shoe.To make this material, the researchers use a 3D printing method that employs photopolymerization, which solidifies a liquid resin into a desired geometry or shape using light. “Nature excels in both self-healing and 3D shaping; for example, self-healable human organs feature functional geometries and microstructures. However, tailoring man-made self-healing materials into complex structures faces substantial challenges. Here, we report a paradigm of photopolyme...
2019 - 02 - 28
Concurrent Activity | 2019 Shanghai International Powder Metallurgy Forum
Academic Annual Meeting of China Powder Metallurgy Alliance & 2019 Shanghai International Powder Metallurgy ForumThe application fields of powder metallurgy technology are expanding day by day. In order to further promote the technological innovation of new materials, new technologies and new process in powder metallurgy industry, to continuously learn from and understand the most cutting-edge scientific and technological achievements and development at home and abroad, to improve China’s scientific progress and technological upgrading in the field of new materials, and to enhance communication and cooperation among PM manufacturers, equipment manufacturers, institutions of higher learning, research institutes and end-user groups, China Powder Metallurgy Alliance, in conjunction with Uniris Exhibition Shanghai Co., Ltd. (Organizer of PM CHINA), will hold the Academic Annual Meeting of China Powder Metallurgy Alliance ...
2019 - 02 - 27
News Let you know our latest information
Share:
Uniris Exhibition Shanghai Co., Ltd.
Shanghai Branch 
Tel: 4000 778 909 
E-mail:irisexpo@163.com
Guangzhou Branch
Tel:020-8327 6389
Email:pmchina@unifair.com
PM CHINA Official Website
犀牛云提供企业云服务
Scan the QR code to visit the official website by phone

进入手机网站
金陵棋牌 金陵棋牌 宝乐彩票平台 翡翠棋牌平台 555棋牌游戏APP下载 翡翠棋牌官网 翡翠棋牌官网 555棋牌游戏官网 555棋牌游戏 翡翠棋牌官网